Blog

miraiGen.Cube is nearly finished

Our AI server, miraiGen.™Cube, is close to finished. The first production unit will replace the prototype system we run here, and we will keep using it. Here are my favourite features.

Engineering Diary › miraiGen.Cube

Our AI server, miraiGen.™Cube, is close to finished. We built it for our own work, and we turned it into a product because we liked using it. The first production unit will replace the prototype system we run here, and we will keep using it. Here are my favourite features.

Security diagnosis and repair handled by the AI

Vulnerability reports arrive every day. Someone has to check whether your own server is affected and fix it if it is. Plenty of companies spend a great deal on that work. On this product, both the diagnosis and the repair can be left to the AI. How much of it ends up automatic is still being settled; we are aiming for close to all of it.

Hold a phone to the unit and a diagnostic screen opens

This is the first announcement of this feature. When the display stops responding and you suspect a fault, holding your phone against the unit opens a diagnostic screen on the phone.

Beyond that there is a button on the unit that wakes the AI to run a diagnosis (patent pending). Some states cannot be recovered, but we have kept a path to talking with the AI right to the end.

An engineering edition ships at the same time

Also announced here for the first time. The USB ports are opened up, so programs can be written to a microcontroller from the unit. You ask for it in words: "write the program to the board I just connected, as ID:0001". Writing the embedded program itself can be left to the AI as well.

Our own dimmer controllers, and this product itself, were built this way. I decide the design and describe it to the AI, and the AI writes the code. Asking an AI on a PC to develop something means being stopped again and again to approve each command; on this product it runs through with almost no stops. If a program turns out to be faulty after it goes in, a check every minute catches it and restores the previous version automatically.

We draw the schematics and the board layout in KiCad, and the circuit and the part selection can be checked automatically. With several hundred components on a board, removing every mistake is hard to do; this check by the AI has cut the mistakes down sharply. It does a great deal to keep wasted cost out.

Bookkeeping and quotations stopped taking time

Bookkeeping here meant typing well over a thousand journal entries a year into the accounting software, one line at a time. That typing is now zero. Quotations go the same way:give the customer, the quantities and the unit prices, and a PDF comes out. The other day three quotations took just three minutes.

PDF documents can be produced as well. Register a template and have documents made to match it, or ask the AI for a new PDF document.

In summary

  • Security diagnosis and repair, fault diagnosis, and writing programs to microcontrollers can all be left to the AI
  • Three versions are being built: the first production unit, loan units for resellers, and a version with features specific to the company it is lent to

The first unit is not far off. I am building it with real excitement, and work is a great deal of fun right now. Please look forward to it.

← Back to Engineering Diary All posts